Audi A6L all key lost new key made by VVDI2 and VVDI PROG

This blog will show you steps for VVDI2 Commander and VVDI PROG Key Programmer work together to make a new key for Audi A6L all key lost.

Step1. Open Audi A6L engine cover, find the engine and disassemble it. Remove the engine ECU.

Warm up the ECU edge to open ECU safely, find the 95320 chip as below, desolder the chip and put it on VVDI PROG to read data.

Step2. Open VVDI PROG software, choose correct “Type”, “Brand” and “Chip” at right side. Click “New” and “Read” then “Save” to save the bin file. Remove the chip 95320 from VVDI PROG, solder it back to engine ECU and reinstall ECU to Audi A6L.

Step3. Open Xhorse VVDI2 software and choose “Audi” option. Click “Special Function” on top menu bar. Then click “EEPROM Data Processing Tool”. First you need to calculate the CS code: choose “EEPROM Simons PPDIx- Reset component protection data”.

Step4. Click “Read” and load the bin file that is read out just now, click “Open”. And you can see the CS code as picture, record it with your camera or pen.

Next is to calculate the PIN code. Back to “EEPROM Data Processing Tool” dropdown menu and choose “EEPROM Simons PPDIx- Security Access Code”. Click “Read” and load the bin file, PIN code is read out. Record the code.

Step5. Back to Xhorse VVDI2 software main menu; choose “Key Learning” and “Audi A6/A7” option. Input the CS code and PIN code then you can see the buttons “Learning Key” and “Generate Dealer Key” are working.

Put a new remote key chip into VVDI2 coil. Click “Generate Dealer Key” and it will show success soon.

Step6. This step is going to learn key. Disconnect the short insurance line and connect it again.

Now take out the remote chip and put it close to car’s ignition data coil. Open and close the car door. Turn on ignition and press down brake. Click “Learning Key” and you can see learning success.

Step7. This is the last step: read out EZS-EEPROM (J518) EEPROM to generate the OEM remote control.

Choose chip type “9S1201128” then save EZS-EEPROM (J518) EEPROM file. And start to generate the OEM remote control.

Choose the EEPROM file to open then put the remote control vertically into VVDI2 coil. Click “Open” and “Next”.

The OEM remote control is generated successfully! Assemble it to the new key and test. Now Xhorse VVDI PROG Programmer and VVDI2 Tool together make a new key successfully for Audi A6L all key lost! The car will start and the remote function will work!

Xhorse VVDI2 VVDI II vs. Xhorse VVDI Prog Programmer

Xhorse Tech has newly released two powerful OBD tools: VVDI Prog and VVDI 2. What’s the difference between VAG Vehicle Diagnostic Interface VVDI2 and VVDI-Prog?

VVDI2 diagnostic & programming interface

VVDI-PROG programmer:

Major difference:

(detail comparison, please check table below)

VVDI 2 is the update version for VVDI (Item number SV30), it inherited VVDI all features, mainly used to diagnose, programming ECU and keys and so on. VVDI2 added other features:

VVDI2=VVDI options + BMW Multi Tool options+Porsche options+J2534(free)+ Tango(free)+Remote control generation(free).....more other function

While VVDI prog is a newly developed ECU programmer mainly for EEPROM ECU, MCU programming and pin code calculation.

VVDI PROG=（BMW ISN READ）+（EERPOM read)+(mcu read MOTO 9S12,5M48****)+PIN Code Calculation(more pin coder Algorithm ,than 40 type)

In short, VVDI 2 is a comprehensive OBD tool for diagnose and programming (program ECU and program keys). VVDI Prog turns to be an car ECU programmer.

What’s the difference of the VVDI 2 and VVDI Prog?

Item	VVDI 2	VVDI Prog V2.1.0
Update	Update online	Update online
Language	English only	English/Chinese
Function	Diagnose Odometer correction ECU programming Key programming Key learn Etc	Program EEPROM Program MCU Program ECU Pin code calculation
Operating system	Windows XP/Windows 7	Windows XP/Windows 7
Price	€2,110	€385

Xhorse VVDI Prog read VW 44 IC EEPROM

Xhorse VVDI Prog V2.1.0 programmer read VW 44 IC EEPROM

Xhorse VVDI Prog and VVDI 2 Video

1.vvdi2 and vvdi pro ADD bmw cas4+ key

https://www.youtube.com/watch?v=ywSfqhqyH9Y

2.VVDIPRO PIN computing functions

https://www.youtube.com/watch?v=eLOjcH0zdng

VVDI Prog vs. Xprog M vs. R250 vs. R270 vs. Orange

VVDI Prog vs. Xprog M (XP Prog)vs. R250 vs. R270 vs. Orange

Difference among these ecu tuning box programmers,Xhorse VVDI-prog, Xprog-M ECU box, BMW CAS R250, BMW CAS R270/R270+ etc, check table below




From the table comparison above, it is easily to see the VVDI Prog V2.1.0 programmer is a better replacement.

How to use VVDI Prog pin code calculation function?

VVDI PROG Programmer is a comprehensive VAG diagnostic & programming OBD tool, but it keeps updating other vehicle models and features, like calculate pin code/immo code for multi vehicle models, such as Ford, Mazda, Nissan, Saab etc. Here are some pin code calculation & method example provided.

How to use VVDI Prog pin code calculation function?

1)      VVDI PROG Ford Outcode/Incode calculation

Open VVDI Prog software

Select "PIN Calculator" tab

Select vehicle model: Ford->> Outcode->Incode

Press enter the outcode, click “Calculate” button, the VVDI Prog will read Ford incode from vehicle’s immobilize

The vehicle information will display on the button of the screen. Wait the initialization completed. Then click “Calculate” button again, the system will display Ford incode

2)      Nissan 20-digit PIN code calculation by BCM code

Select vehicle model:  Nissan -> PIN 2013-

Manually enter BCM number (BCM code)

Click “Calculate” button

Again the system will display initialization and calculation complete information on the button.

The VVDI Prog device main unit yellow indicator will flash at the same time.

The Nissan 20-digit pin code is calculated.

3) Hyundai PIN Code calculation via VIN

Some vehicle model pin code can be obtained by simply enter the VIN (Vehicle Identification Number), for example Hyundai pin code

Again select Hyundai and model

Copy or enter the VIN number, press “Calculate” button

Again wait the initialization is done and press “Calculate” button, the PIN Code will be displayed

4) VW Magotan Pin code calculation by load dump file

Some vehicle pin code can be obtained by load the dump bin file as well, for example VW Magotan

Load the dump file

The PIN code will displayed on both windows and on the button of the program

Apart from pin code calculation, the VVDI Prog also supports data comparison.

Load dump data file you want and then enlarge the file to make a comparison, displayed pictures below:

2015 Original Xhorse VVDI Prog V2.1.0 verified working

VVDI Prog 2.1.0 programmer is verified working. Original VVDI-Prog is the new powerful programmer developed by X-horse Tech. 

What’s VVDI Prog programmer?

VVDI PROG=（BMW ISN READ）+（EERPOM read)+(mcu read MOTO 9S12,5M48,,,,)+PIN CODER Calculation(more pin coder Algorithm ,than 40 type)

Software Version: V2.1.0

Language: English/Chinese

Update: online

 

Hardware:

VVDI Prog super programmer advantages:

1. Original Xhorse product, hardware is well built. It has STarm and LPT port used for ICP, not for linking with pc.

2. 35080, 080D0, 160D0, erase quickly,erase Can be done in 10 s.

3. While reading MC9S12 series Chips, VVDIProg is more stable than Xprog-M ECU box.

4. While attacking MC9S12 series Chips, VVDIProg is faster.

5. While reading some EEPROM Chips, Orange are not able to recognize Chips.

6. Spared voltage attack function can be used when needed.

7. Spared CAN Cable, K-Line Cables can be used when needed.

8. Read CAS4 (5m48) will be more stable than XProg, faster and faster.

VVDI Prog Function List:

VVDI Prog vs. Xprog M (XP Prog) vs. R250 vs. R270 vs. Orange

 

VVDI Prog Package:

1pc x VVDI Prog Programmer multiplexer    

1pc x Square USB cable   

1pc x SOP16 test socket      

1pc x 16pin converter(Support SOP/SOT/SSOP)

1pc x MCU reflash cable               

1pc x ECU reflash cable 

1pc x MC9S12 reflash cable(Used to program MC9S12 series chip)

1pc x 12V3A power adapter(High quality power supply)

VVDI-Prog Adapters/Connectors:

16-pin locking socket 

 MCU Reflash cable

Used to program MCU on board

ECU Reflash cable

Used to program ECU

MC9S12 Reflash cable 

Used to program MC9S12 series chip

For detail EEPROM, ECU, MCU list, please check eobdtool.co.uk webpage. The VVDI Programmer is now available in our shop at the price of €385.00

How to install Xhorse VVDI Prog V2.1.0 software

Xhorse VVDI Prog ECU programmer 2.1.0 is developed to program multi vehicle EEPROM, MCU and ECUs. VVDI-Prog adds  pin code calculation functions for multi-brand vehicle models as well. Here is the instruction on installing V2.1.0 VVDIPROG software step-by-step. 

Free download VVDIProg 2.1.0 software driver

https://mega.nz/#!O8UUgDDa!dEWkvUNYN9q-oMFg359faeSjyYZM5QASmeT-iAywYNY

Software version: V2.1.0 

Language: English/Chinese

Operating system: Windows XP

How to install VVDIProg 2.1.0 software?

1) Install VVDIPROG software driver 

2) Run VVDI Prog software and start programming

1) Install VVDIProg 2.1.0 driver

Insert DVD to computer

Open My Computer

Open VVDIProg2.1 (E:) DVD

Copy and paste VVDIProg folder to desktop

Connect the VVDI prog programmer with computer via USB port

Wait the system to found hardware wizard

Select “Install from a list of specific location (Advanced)”, click “Next”

Include this location in the search C:/Documents and

Settings/Adminnistrator/Desktop/VVDIProg/driver/ft232, click “OK” and “Next”

Click “Finish”

Install driver follow the previous instructions again

Select “Install from a list of specific location (Advanced)”, click “Next”

Click “Next”

Click “Finish”

Open My Computer>>Manager>>Device Manager>>Ports>>USB Serial Port (COM4) to check well communication is built 

2) Run VVDIPROG V2.1.0 software

Open VVDIProg folder on desktop

Open VVDIProg software

Click “Language” tab to exchange language between English and Chinese 

Select ECU type and chip type from the list

The VVDIProg software will prompt which cable/connector is going to be used 

Click “Connection diagram” button

Click “New” tab

Click “Read”

The software will display EEPROM data 

Click “Save”, save the bin file to desktop and name it 93c66, click Save 

Create a new window

Select other ECU type and chip type

The system will also prompt which cable is about to use and the detail diagram 

Select other functions and follow the system prompts.