VVDI MB Key Tool


How Xhorse VVDI RKE BOX Program Remote Key for New Alto

Xhorse VVDI RKE BOX is tested working fine to program remote key for New Alto. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding key. How they work? Please go on reading following parts.

Two optional remote key for this test:
  1. Xhorse VVDI RKE BOX 6V/9V/12V

  1. Xhorse VVDI RKE BOX 3V

The Original Straight Car Key: (with ID46 Electronic Chip )

Connecting Diagram: How Xhorse VVDI RKE BOX connect with VVDI 2 and mini remote programmer
 Programming New Remote Key Manually with Xhorse VVDI RKE BOX
Step 1: Open the car door by driver’s seat while keep other doors close.
Step 2: Insert car key into ignition lock cylinder, turn the key to the “ON” position. Pull out the key within 10 seconds.
Step 3: Press and release door lamp switch beside driver’s seat for 3 times and this action should be done within 20 seconds.
Step 4: Repeat Step 2.
Step 5: All car doors automatically close and open for one time. Press the “Unlock” button of remote key and all doors will automatically close and open for one time. Now the new remote key is programmed successfully.
There are several points as follows can be proved after test:
  1. VVDI RKE BOX can program remote key correctly without any functional error.
  2. The remote control distance can be as long as 100 meters.
  3. Comparing with the original straight key, The folding key makes user more satisfied avoiding prick user’s leg in pocket.

No comments:

Post a Comment