VVDI2 Key Programmer with BMW FEM/BDC Function User Guide

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information 

(3 steps for make keys:get key info->programming FEM/BDC system->make keys)


1.support make new key with ignition switch(support add spare key and all key lost, 

all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first
 

3.in FEM/BDC interface, if 'get key info' the type not support, it will show:

customer should use "BMW E-sys software" program FEM/BDC system.

then programming FEM/BDC system with VVDI2-BMW
 

4.when operation on 'programming FEM/BDC system'interface,

please don't close this software window until all procedures completed.
 

5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, 

please refer to the software diagram, select the correct one.
 

6.programming FEM/BDC system,must restore the original eeprom, restore coding.

if cannot restore coding or after restore coding assemble FEM/BDC module back to 

car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for 

FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keep ringing,

please contact technical support for help.usually operation on FEM/BDC should be ok,

just need to programming.

More information, please check on: http://www.eobdtool.co.uk/wholesale/vvdi2-vvdi-pro-commander.html

Xhorse VVDI2 BMW Commander Function and Vehicle list

Xhorse VVDI 2 BMW Commander covers full functions of BMW Multi Tool, not only support BMW Diagnosis, BMW Key programming, but also support mileage correction and CAS Repair.


Xhorse VVDI2 BMW Software
BMW software support cars: BMW
Support types can be find in the attachment picture
Mainly function: Read/Write EWS, read CAS information, Read/Write CAS EEPROM,
Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with ELV, Key Learn(immo), File Make Key, Unlock Key, File Change KM, CAS Repair etc
OBD Flash ISTA version only need 10 minutes. (No extra power. No backup CAS EEPROM and FLASH). You can find detail in VVDI2 – BMW User Manual

OBD Function 
Support CANBUS100, CANBUS500 and KWP protocol.
Diagnostic CAS information
Key Learn
1) Get Key Info
2) Write Key Info
3) Prepare dealer key with programmer (Support CAS1, CAS2, CAS3, CAS3+, ISTAP)
4) Prepare dealer key with ignition switch (Support CAS1, CAS2, CAS3, CAS3+, ISTAP)
5) Program Key info
6) Enable/Disable Key (Support CAS1, CAS3, CAS3, CAS3+, CAS4, CAS4+)
7) Clear DTC/Shadow
Read/Write CAS EEPROM
Change KM stored in CAS
Read/Write synchronization codes stored in CAS
Synch DME – CAS
Synch CAS – ELV
Read/Write EWS EEPROM


File Make Key
Support following types:
EWS1
EWS2
EWS3
EWS4
CAS1(0K50E)
CAS2(2K79X)
CAS3(0L01Y)
CAS3+(0L15Y/0M23S): Support encrypt version and ISTAP version
CAS4 (F - Series 1L15Y)
CAS4 (F - Series 5M48H): Support CAS4 encrypt version


File Change KM
Support following types:
EWS3
EWS4
CAS1(0K50E)
CAS2(2K79X)
CAS3(0L01Y)
CAS3+(0L15Y/0M23S)
CAS4 (1L15Y)
CAS4 (5M48H)
M35080(E – Series cluster)
F - Series cluster


Unlock key
Support unlock key for CAS1/CAS2/CAS3/CAS3+ prepared by VVDI2


CAS Repair 
CAS1 Repair (OBDII)
ISTAP Repair (OBDII)

More information, please check on Xhorse VVDI2 BMW Commander: http://www.eobdtool.co.uk/wholesale/vvdi2-commander-bmw-key-programmer.html