VVDI2 BMW V4.3.0 FEM/BDC Key Learn Programming System User Manual

Xhorse VVDI2 BMW V4.3.0 BMW FEM/BDC key programming function is available

How does VVDI2 BMW V4.3.0 Programming FEM/BDC System Work?

VVDI2 Key Programmer with BMW FEM/BDC Function User Guide

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information 

(3 steps for make keys:get key info->programming FEM/BDC system->make keys)


1.support make new key with ignition switch(support add spare key and all key lost, 

all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first
 

3.in FEM/BDC interface, if 'get key info' the type not support, it will show:

customer should use "BMW E-sys software" program FEM/BDC system.

then programming FEM/BDC system with VVDI2-BMW
 

4.when operation on 'programming FEM/BDC system'interface,

please don't close this software window until all procedures completed.
 

5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, 

please refer to the software diagram, select the correct one.
 

6.programming FEM/BDC system,must restore the original eeprom, restore coding.

if cannot restore coding or after restore coding assemble FEM/BDC module back to 

car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for 

FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keep ringing,

please contact technical support for help.usually operation on FEM/BDC should be ok,

just need to programming.

More information, please check on: http://www.eobdtool.co.uk/wholesale/vvdi2-vvdi-pro-commander.html

Xhorse VVDI2 Key Programmer V4.3.0 with FEM BDC Key Learn Function

Xhorse VVDI2 Commander Key Programmer Newly Updated to Latest V4.3.0 and newly add FEM/BDC Key Learn Function for BMW Vehicle, but you need pay to get authorization for these two functions, if you need or interest, please contact our customer service sales@eobdtool.co.uk to confirm

VVDI2 latest software version V4.3.0 update( 2017-08-16 )
*** Require firmware V4.3.0
===== VAG V4.3.0 =====
1. Bugfix

===== BMW V4.3.0 =====
1. Add BMW FEM/BDC system key learning, erase key
2. Add BMW FEM/BDC system reset KM
3. Add FEM/BDC syste backup coding, restore coding
4. Attention: FEM/BDC Key Learn is an option function, If you need, please contact us for confirm

===== Porsche V4.3.0 =====
1. Bugfix

===== PSA V4.3.0 =====
1. Bugfix

===== Transponder Programmer V4.3.0 =====
1. Bugfix

===== J2534 V4.3.0 =====
1. Bugfix

===== Online Upate Tool V4.3.0 =====
1. Bugfix

===== Quick Start V4.3.0 =====
1. Bugfix

Eobdtool.co.uk offer you latest Xhorse VVDI2 Key Programmer V4.3.0 Software Download Link for free: https://mega.nz/#!W1pSRRTL!0n8OX4wshaB1s0O06SDhTR0KvO32nPHZWg4CQjBMdrA