How Xhorse VVDI RKE BOX Program Remote Key for KIA K3

Xhorse VVDI RKE BOX is successfully tested ok to program remote key on Kia K3. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding key. How they work? Please go on reading following parts.

Two optional remote key for this test:

1. Xhorse VVDI RKE BOX 6V/9V/12V

   

2. Xhorse VVDI RKE BOX 3V

Xhorse VVDI RKE BOX’s Application

1. To change the original straight key to folding key.
2. Temporarily to add a new remote control or replace original remote control
3. Only one remote for the original car (such as the Chinese, Besturn, etc.)
4. To seek low-cost remote control instead of the expensive original one

Note: at least one original remote control for use of the kit

The Original Straight Car Key: (with ID70 Electronic Chip )

Connecting Diagram: How Xhorse VVDI RKE BOX connect with VVDI2 and mini remote programmer

Xhorse VVDI RKE BOX Matching Steps:

1. Press SET button on the Host box (in the internal hole at the side of unit), then the buzzer beep twice, to go into the matching state
2. Press any button on the new remote for a while until the buzzer beep continuously. Key matching is completed.
3. Repeat the previous two steps to add another new key.

1. Buzzer
2. Key to be added
3. SET button

Xhorse VVDI RKE BOX Program New Remote Key by OBD

There are several points as follows can be proved after test:

1. VVDI RKE BOX can program remote key correctly without any functional error.
2. The remote control distance can be as long as100 meters.
3. Comparing with the original straight key, Xhorse VVDI RKE BOX makes user more satisfied by better handfeel.

How Xhorse VVDI RKE BOX Program Remote Key for New Alto

Xhorse VVDI RKE BOX is tested working fine to program remote key for New Alto. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding key. How they work? Please go on reading following parts.

     

Two optional remote key for this test:

1. Xhorse VVDI RKE BOX 6V/9V/12V

   

2. Xhorse VVDI RKE BOX 3V

 

The Original Straight Car Key: (with ID46 Electronic Chip )

Connecting Diagram: How Xhorse VVDI RKE BOX connect with VVDI 2 and mini remote programmer

 Programming New Remote Key Manually with Xhorse VVDI RKE BOX

Step 1: Open the car door by driver’s seat while keep other doors close.

Step 2: Insert car key into ignition lock cylinder, turn the key to the “ON” position. Pull out the key within 10 seconds.

Step 3: Press and release door lamp switch beside driver’s seat for 3 times and this action should be done within 20 seconds.

Step 4: Repeat Step 2.

Step 5: All car doors automatically close and open for one time. Press the “Unlock” button of remote key and all doors will automatically close and open for one time. Now the new remote key is programmed successfully.

There are several points as follows can be proved after test:

1. VVDI RKE BOX can program remote key correctly without any functional error.
2. The remote control distance can be as long as 100 meters.
3. Comparing with the original straight key, The folding key makes user more satisfied avoiding prick user’s leg in pocket.

Xhorse VVDI RKE BOX Test Report: Program Remote Key for Honda CRV

Xhorse VVDI RKE BOX is successfully tested ok to program remote key on Honda CRV. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding remote key. How they work? You can check following parts.

Two optional remote key for this test:

1. Xhorse VVDI RKE BOX 6V/9V/12V

   

2. Xhorse VVDI RKE BOX 3V

The Original Straight Car Key: (with ID46 Electronic Chip )

Connecting Diagram: How Xhorse VVDI RKE BOX connect with VVDI2 and mini remote programmer

Programming New Remote Key Manually with Xhorse VVDI RKE BOX

Step 1: Insert car key into ignition, turn ignition on and press the”Lock” button on remote controller, then turn ignition off.

Step 2: Turn ignition on for the second time, press the”Lock” button on remote controller, then turn ignition off.

Step 3: Repeat Step 2 twice.

Step 4: After center console has reaction, press the “Unlock” button to finish programming.

If you want to program two remote keys, other steps are the same. But Step 4 should be like that: press both sides of the “Lock” button for one key, center console has reaction, then press the “Lock” button twice for another key.

Xhorse VVDI RKE BOX can program remote box and chip separately While the original key’s remote function will work automatically when car star.

 There are several points as follows can be proved after test:

1. VVDI RKE BOX can program remote key correctly without any functional error.
2. The remote control distance can be as long as 20 meters.
3. Comparing with the original straight key, The folding key makes user more satisfied avoiding prick user’s leg in pocket.